Cooking, baking, cleaning, loo pongs etc
 #150004  by pipitiwai
 Sat Mar 23, 2019 1:03 pm
My 3yr old Kea has white rubber mouldings where the front and back fibreglass panels are attached to the main body and also around the entrance door and these have become black with mould. what can I use to remove it and also stop it coming back.
 #150005  by scubadoo
 Sat Mar 23, 2019 1:21 pm
A search of previous posts find this amongst others. It should help.
Our roof has survived 2 years without another application.
 #150012  by johnaye
 Sat Mar 23, 2019 9:06 pm
I very recently did my white door rubbers with Jiff on a damp cloth and elbow grease. It wasnt 100% but a vast improvement on what i had. There was slight yellowing in a few places but overall i was pleased with the outcome.
 #150017  by Derb
 Sun Mar 24, 2019 7:45 am
As with Johnaye I used Jif with both a damp cloth and an old toothbrush. With the selling of our previous Jayco Heritage, I simply replaced the strips entirely and the resultant change in the appearance of the van was remarkable. It is a constant battle with vans looking after the white plastic.
 #150021  by RaymonD
 Sun Mar 24, 2019 11:38 am
White Vinegar will evidently kill the mould and it can be cleaned of.
 #150025  by *Glenn*
 Sun Mar 24, 2019 6:15 pm
Domestos is the best product. Bare in mind that it is a bleach type product when using it. Apply with a small damp cloth and repeat after a week. Takes a week or so to work and prevents the mould for about 6 months. :TU
 #150032  by *Glenn*
 Mon Mar 25, 2019 1:02 pm
You could try that and keep us informed. But my suggestion does the trick. Been doing it for 5 years now and i've still got half a bottle left. Needs doing again now. Last time was January 2018.
Pay with Paymate Express