#133836  by busorbust
 Wed Oct 25, 2017 1:11 pm
Hi All! I have a conversion on at the moment. Im looking at installing a fireplace in our bus. The most logical spot fitting in with our plan is on the front drivers wheel arch (raised) directly behind the drivers seat. The wheel arch is 910 wide by 865 long and is fitted with a reenforced seatbelt steel post in the top right corner. My worry is that ill have to have a high barrier to avoid the seatbelt getting hot which will then block the view etc
Also shes a front mounted engine and the cover comes to 320mm of the proposed fire area. Ideally i would like to have a little firewood cuby behind the seat and sheilding the engine from the heat. Any ideas appreciated!
Pay with Paymate Express