#131403  by joncar
 Mon Aug 21, 2017 9:34 am
I recall once being told that - for COF inspection, you must not cover up the 'stamp' on windows which shows it is the correct (safe) type. Is this true?
I intend to cover up a number of windows on the bus with a non see through decal product - dark Grey to keep the light out. This will mainly be where full length cabinets are, plus the shower/toilet. One way around it is to cut out the decal covering each 'stamped' area.

 #131409  by Paul
 Mon Aug 21, 2017 12:37 pm
Yes they must be visable, i was told once to put a circle in pen around them so they could be seen when wet.Did not happen Paul
Pay with Paymate Express