Hi Fellas. I have spent a day or so rolling around under the bed in the Southern Star having a bit of a tidy-up of the Batteries, Inverter and associated wiring. Is great when you finally borrow a good lug-crimper and a plan comes together. I munted a little finger in the process so typing is a bit frustrating
. Waaaaay back Neil brought in some Battery Monitors from overseas and I bought one off him. Neddy,s #3 it was. Soooo - I finally fitted up the Shunt (200 amp) whilst completing this project. A good while back I also ran out the wiring through the fridge-cavity to the panel on which I am mounting the Monitor (along with a spare 7-conductor cable for future use). Now I havent got a set of installation/operating instructions for the Monitor
Terminals as follows;
+ (Vext) -.......... + (RLY) -.......... Vin.......... SNS.......... AGND.......... GND
That is 8 Terminal connections.
I know all of you technical types are very keen for me to complete the installation of my flash new expensive "Worry-Meter" so I can stop relying on my trusty "Voltmeter"
Any help much appreciated whilst I have a bit of momentum with this project.
Derb. 2017 Colorado LTZ 4 x 4 Auto. 2014 Southern Star 720 and 1980 Zephette 340. 2 x 100 a/h AGM. 3 x 150w solar. Ctek D250S-Dual controller/MXS15 charger.172L fresh/grey. Diesel heat. RMD8555 fridge.